MLK-L1-CZ06-7020

FMC Expansion Port: This port likely supports high-speed data transfer and is used for connecting additional modules or peripherals.

LPC Expansion Interface: Includes 36 pairs of differential signals and supports ADJ voltage, which is useful for various communication protocols.

HDMI Interface: One HDMI output supporting DV11.0/HDMI1.0 protocols, capable of a maximum output of 1080p at 60fps.

Gigabit Ethernet: Features one PS Gigabit Ethernet port and four PL Gigabit Ethernet ports, providing high-speed network connectivity.

JTAG Interface: Two JTAG interfaces (with one PSJTAG reserved and unused) for debugging and downloading using a programmer.

USB 2.0: Supports both HOST and OTG modes, switchable via a jumper cap.

USB to Serial Ports: Two USB-to-serial ports, one on the PS side and one on the PL side, with MINI interfaces.

SD Card: One TF card interface and one reserved TF1 card interface (usable when EMMC is not soldered).

RS485: Two SP3485EN-L/TR interfaces for serial communication.

CAN: Two SN65HVD232DR interfaces for Controller Area Network communication.

EEPROM: One 24LC02 EEPROM for non-volatile memory storage.

CEP Interface: A 20-pin CEP interface with 18 GPIOs, likely for connecting cameras or other peripherals.

RTC: One DS1337 Real-Time Clock for timekeeping.

PL Oscillator: A 100MHz oscillator on the baseboard.

LEDs: Eight user LEDs for status indication.

Buttons: Four user buttons for input.